Products and Services

FIXED RESTORATIONS

MULTILAYERED SOLID ZIRCONIA

This zirconia fit delivers in both strength and aesthetic. If your patient has a very strong bite but is concerned about the aesthetic result then Multi-Layered Zirconia restoration is the right choice for them. With a strength ranging from 600 to 1200 MPa, this material has pre-built layers, mimicking the structural integrity of natural teeth. The aesthetic can be likened to the layers of dentine, incisal and translucency in the natural tooth. Consequently, the use of this material gives the final restoration the most natural appearance.

Indications: Suitable for single units, bridges, or full arch restorations

Adjustment Tools required: water cooled slow-speed, smooth/fine diamond or specific zirconia stone bur.

Aesthetic:
Strength:
Translucency:

ZIRCONIA LAYERED WITH PORCELAIN
This is one of our top quality aesthetic restorations for achieving shade continuity. The zirconia framework is designed using CAD-CAM. The strong substructure is hand finished with porcelain for an exceptional aesthetic result. This technique allows us to achieve the best shade matching and add specific aesthetic features like cracklines, stains, mottling etc.

Indications: Suitable for single units, bridges, or arch restorations
Adjustment Tools required:

Aesthetic:
Strength:
Translucency:

FULL CONTOUR STAINED AND GLAZED E.MAX

Our CAD-CAM technology meets the requirements of individual cases, reliably developing full anatomical shapes, this means that our stained and glazed E.max fixed restorations are aesthetically natural looking with the full benefit of the signature E.max strength. This is the right choice for the cases where the aesthetic is the top priority. Therefore, these fixtures are most often, but not exclusively, used for veneer cases.

Indications: veneers, inlays, partial crowns, crowns, anterior and up to second premolar bridges
(up to 3 units)
Adjustment Tools required:

Aesthetic:
Strength:
Translucency:

Contraindications: Bridges longer than 3 units, cantilever bridges, maryland bridges

Preparation guide: DOWNLOAD HERE

E.MAX LAYERED WITH PORCELAIN

The E.max framework with porcelain finish is often considered by our clients in order to deliver an exceptional aesthetic result for patients in need of anterior rehabilitation. Predominantly designed for the single unit restorations and small 3 unit bridges, these are a simple solution for isolated dental cases.

Indications: veneers, inlays, partial crowns, crowns, anterior and up to second premolar bridges
(up to 3 units)
Adjustment Tools required:

Aesthetic:
Strength:
Translucency:

Contraindications: Bridges longer than 3 units, Cantilever bridges, Maryland bridges

Preparation guide: DOWNLOAD HERE

PORCELAIN FUSED TO METAL

Porcelain fused to metal restorations are classic products which combine both worlds, CAD-CAM and traditional craftsmanship of our technicians. We are passionate about utilising traditional methods as an appropriate solution for dental cases to meet the requirements of our dentists and their clients.

Indication: Single crowns, Maryland bridges, Cantilever bridges, short and large span bridges
Adjustment Tools required:

Aesthetic:
Strength:
Translucency:

COMPOSITE FUSED TO METAL

New generation nano-composites with ceramic claster technology deliver improved mechanical properties and high stress resistance to the restorations. This highly biocompatible material has amazing aesthetic qualities, this allows it to be quickly adjusted by adding or trimming whilst chairside. The composite bonds mechanically and fuses chemically with the metal to create a restoration with high flexural strength.

All these properties make nano-composites increasingly desirable for the extensive range of restorations, from single crowns to full arch bridges.

Indication: Single crowns, Maryland bridges, Cantilever bridges, short and large span bridges
Adjustment Tools required:

Aesthetic:
Strength:
Translucency:

COMPOSITE CROWNS

Due to the latest nano-technology our composite material combines strength, durability and exceptional aesthetic. In addition to the strength and high biocompatibility composite crowns are easy to alter, add or remove. This means they are practical, adjustable and preferable for some special cases.

Indications: single unit Crowns, Inlays, Onlays, Veneers.
Adjustment Tools required:

Aesthetic:
Strength:
Translucency:

PMMA TEMPORARY RESTORATIONS

We design our milled PMMA material to give your patients a temporary solution from single crowns to long span bridges. We utilise CAD-CAM technology to produce durable and aesthetic crowns and bridges as provisional restorations for your patients.

Indications: Single unit crowns to short & long span bridges.
Adjustment Tools required:

Aesthetic:
Strength:
Translucency:

IMPLANT RESTORATIONS

SURGICAL GUIDES

We design our precise surgical guides using 3Shape Implant Studio®. Whether you choose pilot or fully guided (drill sleeve), our services will provide you with peace of mind and reduced risk by pre-planning, to effortlessly streamline your next surgery.

Our Precise Surgical Guides will allow you to place the implant in a very specific, pre-planned position at the ideal depth, width and angulation to fit the required space. It helps to position an implant in the ideal location in the bone and in relation to the other teeth. Our technicians will work with you designing the final restoration digitally placing it in the most desirable position with help of CBCT scan data. All this happens before the surgery even starts. After you approve the CAD design we print the surgical guide for the specific implant system you have chosen for your patient. This will enable you to make the implant placement faster, easier and more predictable. All potential issues can be detected and corrected during the design process to avoid future complications

If you prefer to use pilot drill guides we can design and print them to your specifications. Please let us know your design requirements and we’ll do the rest.

IMPLANT RETAINED CROWNS & BRIDGES

We understand that maintaining high success rates is a top priority when it comes to implantology. That is why we have partnered with Dess®-Abutments and Bahar Dental Lab to provide you with custom designed and milled abutments for more than 60 implant systems.
Our clients choose between state of the art Titanium Custom abutments and Ti base hybrid restoration (titanium interface connection with choice of restorative material), and our technicians are on hand to help select the most suitable option on a case by case basis.

If you prefer to use stock abutments we will only ask you to provide stock components with the case and we will take care of the rest.

We offer a choice of Zirconia, PFM, PMMA temporary and Emax implant restorations to meet your requirements. All of the final restorations can be designed as screw or cement retained depending on the case limitations.

SCREW RETAINED IMPLANT DENTURES

FRICTION FIT ACRYLIC DENTURE ON IMPLANT BAR

The most sought after fixed restorations in the market. Renowned for their cutting edge technology. These friction fit implant bars are advantageous due to their user-friendly qualities, well supported denture anchor and excellent patient feedback.
We recommend friction fit implant bar retained dentures if your patient prefers to remove and clean the denture themselves as they would do with normal dentures. This choice also guarantees a well supported denture anchor within the oral cavity by means of friction between the bar and the retentive clips.

LOCATOR RETAINED DENTURE

Use of the implant locators is another way to ensure good retention and stability of the acrylic denture in the mouth. This system allows the patient to remove the denture for cleaning and easily clip it back in place.
This denture is at the height of innovative pivoting technology, treating up to 40° angle correction between implants and allowing for customizable levels of retention. These features mean this device has exceptional durability, resulting in high levels of patient satisfaction.

REMOVABLE RESTORATIONS

ACRYLIC DENTURES

Our Acrylic dentures are produced using tried and tested hand made methods using high quality, plaque resistant acrylic and choice of Enigma or Mertz Artegral denture teeth. But stay in tune regarding our printed dentures…

TEMPORARY ACRYLIC DENTURES

If you need a temporary solution – we’ve got it. Our temporary acrylic dentures will give your patients comfort and an option to carry on as normal while they are waiting for the permanent dentures to be made. Temporary dentures come with the basic denture teeth included.

FLEXIBLE DENTURES

If you are planning to replace one or two teeth or want to maintain the space between existing teeth before or during the implant placement our Flexible Denture is a great solution.
Designed to be used as a discreet, temporary unilateral to replace missing teeth within bounded saddles.
This fixture is guaranteed against breakage and fracture of the base material within the parameters of normal day-to-day use.
Please get in touch with our technicians to discuss the suitability of your case.

Indication: temporary space maintaining, temporary discreet aesthetic solution, allergy to acrylic, monomer and metal.
Contraindication: free end saddles, gum fitting denture teeth, mobile teeth.

CHROME COBALT DENTURES

WITH ACRYLIC FINISH

Chrome cobalt frame with acrylic finish is normally designed with metal clasps and hard acrylic on saddle areas. Acrylic material is easy to adjust, reline and add to as well as providing additional mucosa retention.

WITH FLEXIBLE FINISH

It is to maximise aesthetic quality that saddles of chrome frame can be finished in flexible material with aesthetically designed flexible clasps. Flexible clasps will replace metal clasps, these are an ideal solution if your patient prefers no visible metal.
It is important to bear in mind that this finish is not suitable for gum fitted denture teeth or limited occlusal space.

We offer a comprehensive range of digitally produced crown and bridge materials, from the latest multi-layered zirconia, milled E.max and nanocomposites, to well established products that are tried and tested within our industry such as Porcelain-Fused-to-Metal (PFM) or full non-precious metal. Our team is always on hand to help you decided on the best approach for your treatment plan.

Product	Aesthetic	Strength	Translucency
Multi-layered Solid Zirconia	4.5	5	3.5
Zirconia Layered with Porcelain	5	4.5	5
Full Contour Stained and Glazed E.max	5	4.5	4.5
E.Max layered with porcelain	5	4.5	5
Porcelain Fused to Metal	4.5	5	4.5
Composite fused to metal	4.5	5	4.5
Composite crowns	4.5	5	4.5
PMMA	4	3.5	4.5

Do you have any question? Call: +44 114 230 0074